1"x4" KME Naniwa Sharpening Stones for KME Precision Knife Sharpener

1×4 Naniwa 220 The 1×4 Naniwa 220 is one of the best economically priced 220 grit stones on the market. This stone holds its shape well, cuts rather quickly and leaves an edge that is refined enough for most tasks with a good amount of tooth. Like most other 220 Grit stones, this stone also cleans up deeper factory scratches, makes transitioning from diamond plates and stones easier and cleaner, and is a good foundation stone before progressing to finer grits. This stone is 1″x 4″ in size mounted to an aluminium blank with a total thickness of 5-6mm and used with water only. It works best when soaked in water for a minute or two before use. Let air dry and store dry when not in use. 1×4 KME Naniwa 320 Pro The 1×4 KME Naniwa 320 Pro stone workhorse coarse stone used for profiling, repairs and initial maintenance on your edges. Not found outside of Japan, this stand-alone Naniwa stone is close in formulation and feel to the Naniwa Chosera line, and we really dont know why it didnt make it into the final Chosera line-up because we feel it is the very coarse grit stone the line-up is missing at the lowest end. This stone is hard and aggressive, and really cleans up deeper factory scratches, makes transitioning from diamond plates and stones easier and cleaner, and is a good coarse foundation stone before progressing to finer grits. This stone is 1″x 4″ in size mounted to an aluminium blank with a total thickness of 5-6mm and used with water only. It works best when soaked in water for a minute or two before use. Let air dry and store dry when not in use. Abrasive Material: Aluminium Oxide 1×4 Naniwa 600 Grit « Bubble Gum » The 1×4 Naniwa 600 Grit « Bubble Gum » stone is a very flexible coarse stone used for profiling, repairs and initial maintenance on your edges. It gets its name from the bubble gum pink colour, and has a smooth, soft feel to it that packs quite an aggressive punch. This stone cleans up deeper factory scratches, makes transitioning from diamond plates and stones easier and cleaner, and is a good foundation stone before progressing to finer grits. This stone is 1″x 4″ in size mounted to an aluminium blank with a total thickness of 5-6mm and used with water only. It works best when soaked in water for a minute or two before use. Let air dry and store dry when not in use.Abrasive Material: Aluminium Oxide 1×4 Naniwa 1K Goken Pro The 1×4 Naniwa 1K Goken Pro stone is medium stone used for edge profiling, repairs, initial maintenance and for leaving one of the better 1K working sharp finishes out This stone also cleans up deeper factory scratches, makes transitioning from diamond plates and stones easier and cleaner, and is a good foundation stone before progressing to finer grits. One of the key features of this stone is that sets the stage to be followed by natural stone progressions or synthetic stone progressions. This stone is 1″x 4″ in size mounted to an aluminium blank with a total thickness of 5-6mm and used with water only. It works best when soaked in water for a minute or two before use. Let air dry and store dry when not in use.Abrasive Material: Aluminium Oxide 1×4 Naniwa 1K Chocolate Bar The 1×4 Naniwa 1K Chocolate Bar is one of the best economically priced 1K stones on the market. This stone holds its shape well, cuts rather quickly and leaves an edge that is refined enough for most tasks with a good amount of tooth. Like most other 1K stones, this stone also cleans up deeper factory scratches, makes transitioning from diamond plates and stones easier and cleaner, and is a good foundation stone before progressing to finer grits. This stone is 1″x 4″ in size mounted to an aluminium blank with a total thickness of 5-6mm and used with water only. It works best when soaked in water for a minute or two before use. Let air dry and store dry when not in use. Abrasive Material: Aluminium Oxide