DENTEX Dental Light Cure Composite Resin Kit /Etching Gel /Bonding Adhesive

$7.63 Buy It Now or Best Offer
free,30-Day Returns

Seller Store dentalbravo
() %,

Location: Fullerton, California
Ships to: US,
Item: 205034646774

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:60 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Dentex:Dentex
Cure:Cure
Product:Combined Primer & Bonding Agent
MPN:SZ1400800101
Country/Region of Manufacture:China
Intended Use/Discipline:Dental Laboratory,Dentistry,Endodontics,Orthodontics

Dental Direct restoration Light Cure Composite Kit for All Class Caries INDICATIONS FOR USE:Direct restoration for all class caries.Restoration of teeth defect and veneer. REFILL:Light Cure Composite: 4g/Syringe*5Syringe Needles : 5pcs/ box*1Total Etching Adhesive: 5ml/Bottle*1Etching Gel: 2.5ml/Syringe*1Applicators Brushes: 20pcs/box*1Net weight: 188.4gCOLOR: A1,A2,A3,A3.5,B1 FEATURES & ADVANTAGES:Unique dispersion technology ensure the filler evenly distributedRadioopaque and fluoride releasing Optimal polishability and high shade stability.Excellent handling, not sticky to instrument;Suitable for most cases of restoration, extensive indication of usage. INSTRUCTIONS:(1) Preparation: isolate and prepare tooth.(2) Cleaning: rinse the preparation with water.(3) Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.(4) Applying Dentex Self-Etching Light Cure Adhesive (DSA): dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer’s instruction).(5) Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.(6) Applying Dentex light cure composite (DLC): place selected DLC into cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.(7) Finishing: after light cure, adjust restoration.(8) Polishing: use polishing strip or disc to polish the surface WARNING: Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol. PRECAUTIONS: Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of tell, wash skin with soap and water. In severe situation, get medical attention. ATTENTION: To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product. STORAGE:Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use. DISPOSAL: After the product is used up, dispose it as normal medical rubbish. SHELF LIFE: 3 years Quantity: 1 Kit. *************************************************************************************************** Bonding Adhesive Visible light curing is a resin adhesive for dentin enamel 5ml. Describe： This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials. Scope of application： Used for bonding dentine and enamel with resin and ceramic materials. Clinical operation steps: 1. Pretreatment of caries and pulp protection. 2. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. 3. Apply a layer of adhesive evenly on the tooth surface with a small brush. 4. Make the adhesive layer even as far as possible with the wind power of the air gun. 5. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. 6. Please use the composite resin filling material according to the original manufacturer’s instructions, as well as the subsequent grinding and reconstruction processes. Precautions： 1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. 2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor « phenolic substances », which will directly affect the degree of polymerization of the adhesive. 3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. 4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. 5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it. Environment： This product is operated at room temperature. Storage Conditions： This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight. Shelf Life： This product is valid for 2 years, please do not use expired product. Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated. ********************************************************************************** Acid Etching Gel 37%: Dental Etchant Gel 37% Phosphoric Acid Etching Silica Gel 5ml FEATURE： 1. Enamel and dentin etching. 2. Apply special technology to obtain ideal density of the gel. 3. Gel in blue color for better visual management. Indication: It is used for acid etching of tooth enamel and dentin before dental repair. Operation Procedure： 1. Remove surface dirt, rinse the prepared cavities, and blow dry. 2. Apply the etching agent from the tooth enamel to the entire surface of the repair, and etch for 20-40 seconds. The acid etching time of deciduous teeth and dental fluorosis can be extended appropriately according to the actual situation. 3. Rinse with clean water after acid etching, and suck out in time. 4. Use adhesives and resins for bonding repair. ********************************************************************************************************* Temporary Filling Flow Composite Resin Description: Light Curing temporary Composite Resin Used before dental prosthetic installation as temporary filling material to isolate prepared dental cavities from the extreme oral conditions. Light curing composite resin in adequate release to be directly discharged to the dental cavities through disposable tip for easy apply.No easily deviation till dental prosthetic installation Singly and wholly removed No dentritus inside dental cavities after removal Excellent sealing ability adhesive to the side of dental cavities Easy checks for leftover after removal Elasticity allows masticatory some degree Applications: Temporary restoration for inlay, on lay cavity Temporary obturation of implant screw access canals. Blocking temporary sealing，Excellent sealing ability. The filling color is blue Expires in 3 year Temporary Light Cure Cuomposite is not indicated for use as temporary crown and bridge material. 1.RECOMMENDED USE Temporarily fill the cavity (1). Preparation, relining and impression taking are done as usual. (2). Clean and dry the cavity. (3). Place and model a sufficient amount of DX.TEMP into the cavity using a suitable instrument. (4). Light-cure layers with a thickness of up to 5 mm for 20 seconds, layers with a thickness of up to 7 mm for 40 seconds. Fill and light-cure deeper cavities in layers. (5). Remove excesses, shape and finish as usual. Polishing can be done with a polishing paste using polishing cups or discs. Removal of the temporary inlay (a). Insert a suitable instrument such as a probe or a scaler into the temporary inlay and extract the material from the cavity, preferably in one piece. (b) Clean the cavity with a rubber cup/a small brush and cleaning paste. 2.Composition Inorganic and organic filler in a matrix of multifunctional acrylates; catalysts, stabilizers, additives. Free from methyl methacrylate and peroxides. 3.Technical specifications Shore-D hardness≥40 Packing list: 2.5g Syringe 5 Tips FDA Statement The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller name:Dentalbravo City,State:SHENZHEN,China Telephone number:0755-67530378 Statement:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. So you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation,We have to verify your status as an authorized purchaser of this item before shipping of the item. Thanks for your understanding! Payment We only accept paypal payment,it is easy and safe. and for any other payment forms,please kindly contact us in advance. Shipping The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal) Contact Us If you have any query or dissatisfaction, please contact our customer service via eBay Message Center only. If you contact us via eBay message, we’ll reply you within 24 working hours. Thank you so much for your purchase. Wish you have a nice day! : -)

Frequently Asked Questions About DENTEX Dental Light Cure Composite Resin Kit /Etching Gel /Bonding Adhesive in My Website

graphiste-marionbinetruy.com is the best online shopping platform where you can buy DENTEX Dental Light Cure Composite Resin Kit /Etching Gel /Bonding Adhesive from renowned brand(s). graphiste-marionbinetruy.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling DENTEX Dental Light Cure Composite Resin Kit /Etching Gel /Bonding Adhesive on graphiste-marionbinetruy.com?

Frequently Asked Questions About DENTEX Dental Light Cure Composite Resin Kit /Etching Gel /Bonding Adhesive in My Website

What are the best-selling DENTEX Dental Light Cure Composite Resin Kit /Etching Gel /Bonding Adhesive on graphiste-marionbinetruy.com?

Laisser un commentaire