Pellet Mill Feed Machine Body Pelletizer 4HP Motor 220V Two Roller 150kg output

$1199.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store yaxun_shopping23
(3861) 99.1%,

Location: Rancho Cucamonga, California
Ships to: US,
Item: 144629193643

Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Pellet Mill Feed Machine Body Pelletizer 4HP Motor:Pellet Mill Feed Machine Body Pelletizer 4HP Motor
MPN:239602
TECHTONGDA:TECHTONGDA
Featured Refinements:Pellet Mill

Feed Pellet Mill Machine Body Please note do not include any plate, you need to buy the disk separately. This machine does not contain abrasive discs(customers can buy them separately if they need)Please order plate from below page : https://www.ebay.com/itm/XXX/144146577618 Precautions:1.When using, it should be noted that there should be no foreign matter such as stones and iron blocks in the raw materials. After the pellet machine has been working continuously for more than ten shifts, the pressure roller oil hole, the universal joint oil hole, and the linkage shaft oil hole need to be filled with high-temperature lubricating grease to make the pressure roller Good working performance and extended bearing life. 2.During granulation, it is strictly forbidden for the pressure roller to contact with the template to run idly, and the continuous feeding can not be interrupted. At the same time, the pressure roller shaft nut is locked to avoid loosening and damaging the spindle keyway. 3.When granulating, there is no granulation, no discharge, the template should be removed, and after opening one by one, some fiber feed can be added appropriately to restart the granulation. 4.Always check the tightness of the screws in each part of the machine. If there is oil leakage in the gearbox, replace the oil seals in time, and check whether the bearings in the machine head are short of oil. 5.When the pellet machine is working, do not reach into the feeding port with your hands. If necessary, use wooden sticks to help feed the pellets. 6.Before turning on the machine, it is necessary to add less material before turning on the machine. When shutting down, leave a small amount of feed in the machine to prevent the press roller of the machine from contacting the template from idling. 7.If the machine is stuck in operation, stop it immediately, press the pressure roller until the bolt is flat, and then restart the machine. 8.Each time the work is completed, the adjusting pressure roller bolts must be loosened. Usage and specification:1: It applies to chicken industry.2:Corn particles can be put into the machine directly. The feed processed by the machine is smooth and has moderate hardness. The temperature-change during the process is slight so the nutrition can be contained very well.3:The practical’s diameter of the holes can be divided into: Φ2, Φ2.5, Φ3, Φ3.5, Φ4, Φ5, Φ6, Φ7, Φ8.4:The microorganism and parasite can be killed during the process by extrusion. Operation:1: Add oil into gearbox before start.2:Double-check the belt and the screws before operation.3:Clean up the rest after use to prevent damage to the machine. Notice:1: Iron or stones cannot be put into the griller.2:Check the elasticity of the belt, and the bearing frequently. Add oil in time when it needs to.3. Particle length can be adjusted 　Item Number: Feed Pellet Mill Machine Body (239602) On Jul 1, 2022 at 01:16:21 PDT, seller added the following information:

Frequently Asked Questions About Pellet Mill Feed Machine Body Pelletizer 4HP Motor 220V Two Roller 150kg output in My Website

graphiste-marionbinetruy.com is the best online shopping platform where you can buy Pellet Mill Feed Machine Body Pelletizer 4HP Motor 220V Two Roller 150kg output from renowned brand(s). graphiste-marionbinetruy.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Pellet Mill Feed Machine Body Pelletizer 4HP Motor 220V Two Roller 150kg output on graphiste-marionbinetruy.com?

Frequently Asked Questions About Pellet Mill Feed Machine Body Pelletizer 4HP Motor 220V Two Roller 150kg output in My Website

What are the best-selling Pellet Mill Feed Machine Body Pelletizer 4HP Motor 220V Two Roller 150kg output on graphiste-marionbinetruy.com?

Laisser un commentaire