【US】FMD2740C Nema23 Stepper Motor Driver 18-50V DC 256 Microstep 5.6A CNC Router

$23.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store powace1515
(3032) 99.6%,

Location: Dallas,TX
Ships to: US,
Item: 113367973779

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
FMD2740C:FMD2740C
Country/Region of Manufacture:China
MPN:Does not apply
RATTM MOTOR:RATTM MOTOR
Country//Region of Manufacture:China
Driver microste:256 microstep
Current:1.4-5.6A
voltage:18-50VDC

【US】FMD2740C Nema23 Stepper Motor Driver 18-50V DC 256 Microstep 5.6A for CNC Router Engraving Milling Machine Good News:We have USA Warehouse,so we can ship this product from USA Warehouse to you directly. Package include:1 x FMD2740C Stepper Motor Driver FMD2740C DriverInput voltage and SubdivisionInput voltage and SubdivisionPower supply voltage 18 to 50V DCWith the current of 1.4-5.6ASubdivision precision 400,800,1600,3200,6400,12800,25600,1000,2000,4000,5000,8000,10000,20000 and 25000 optionalDrive any less than 5.6A current of 2-phase or 4-phase hybrid stepper motor;SuitableSuitable for a variety of small and medium-sized automation equipment and instruments,for example: Small engraving machine, cnc router machine, etc.CharacteristicsHigh-performanceHigh-speed optocoupler signal isolation inputBipolar constant current chopping mode20kHz chopping frequencyElectrical input signal is TTL compatibleStationary current is automatically reduced by halfShape design is convenient for installation FMD2740C driver is suitable for driving small and medium-sized phase current is less than 5.6A 2-phase or 4-phase hybrid stepping motor. Due to the adoption of the new bipolar constant current chopper drive technology, using the same motor can output more speed and power than other drivers. Segments stepper motor running accuracy improved, reduces vibrations and noise reduction.Power supplyThe supply voltage can work normally in between DC18V-50V, FMD2740C driver can use ordinary switch DC power supply, can also be used for transformer and the bridge rectifier and filter capacitor, capacitance desirable 2000U to 5000U. Note rectified voltage ripple crest does not exceed 50V.Recommended the user to use the 24V-36V DC supply , avoid the grid fluctuations over drive voltage operating range.Electrical wiringThe FMD2740C driver can drive all current less than 5.6A 4-wire, 6-wire or 8-wire 2-phase / 4-phase motors. 14)Matching of the drive and motor FMD2740C driver can drive the domestic and foreign manufacturers of 2-phase or 4-phase motor, in order to obtain the most satisfactory driving, you need to choose a reasonable supply voltage and current setting. Supply voltage determines the level of the high-speed performance of the motor, and the current set value determines the output torque of the motor. Supply voltage selected Generally speaking, the higher the supply voltage, the greater the torque motor at high speed, the more it can avoid the high speed out. But another aspect, the voltage is too high will lead to over-voltage protection, and can even damage the drive, but also in the high-pressure work, low speed vibrations. The output current is setFor the same motor, the greater the current setting, the higher speed, the current motor and drive more heat. So under normal circumstances the current setting into a powered machine warm but not too hot long-term value.Note: the current settings after you run the motor for 15-30 minutes, if the motor temperature is too high, you should reduce the current settings. If the motor current setting, the motor output torque is not enough to improve heat dissipation conditions to ensure that the motor and drive are not hot. PaymentWe accept payment through PAYPAL only. Shipping 1.Items will be shipped within 1-2 days upon the receipt of payment.2.Please check out your address carefully when processing order.We are not responsible for wrong or undeliverable address.We will ship item to your PAYPAL address. If other address, please advise us by eBay or E-mail.3.The estimated delivery time is 7~15 workings days to Asian, USA, AU, UK and most western European countries;15~30 workings days to most other countries. Return&Refund 1.Any reason required for all refund.Item must be in it’s original condition and no physical damage,buyer responsible for all shipping cost.2.When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos,we will help you to solve any problems. Contact 1.If you are not satisfied, please contact us to resolve any issues. Please do NOT leave negative feedback without asking for help. We work hard to make sure EVERY CUSTOMER 100% satisfaction.2.For any inquiries,issues or assistanceplease contact us via eBay or leave your mail address.3.All emails will be answered within 1-2 working days.If you do not receive our reply,please kindly re-send your email and we will reply to you as soon as possible.

Frequently Asked Questions About 【US】FMD2740C Nema23 Stepper Motor Driver 18-50V DC 256 Microstep 5.6A CNC Router in My Website

graphiste-marionbinetruy.com is the best online shopping platform where you can buy 【US】FMD2740C Nema23 Stepper Motor Driver 18-50V DC 256 Microstep 5.6A CNC Router from renowned brand(s). graphiste-marionbinetruy.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 【US】FMD2740C Nema23 Stepper Motor Driver 18-50V DC 256 Microstep 5.6A CNC Router on graphiste-marionbinetruy.com?

Frequently Asked Questions About 【US】FMD2740C Nema23 Stepper Motor Driver 18-50V DC 256 Microstep 5.6A CNC Router in My Website

What are the best-selling 【US】FMD2740C Nema23 Stepper Motor Driver 18-50V DC 256 Microstep 5.6A CNC Router on graphiste-marionbinetruy.com?

Laisser un commentaire